A door that's jumped its track can jam mid-cycle or hang at a dangerous angle. We realign or replace the damaged track section and check what knocked it loose in the first place.
Fixing the symptom without finding the cause usually means the same problem returns within weeks.
We don't eyeball alignment. Plumb and level get checked and confirmed before the job is done.
Track that's visibly bent or dented from impact gets replaced rather than hammered back into shape.
Vehicle impacts often bend both the track and the bracket mounting it to the frame. We check both.
Whatever brought you here, one of these service lines is the fix, and one call gets a technician moving.
We realign horizontal and vertical track sections together, since a shift in one usually affects the other.
Visibly bent or dented track sections get swapped for new standard sections rather than bent back into shape.
A roller jumping the track repeatedly usually means the rollers themselves need replacing along with the fix.
Collision damage often affects more than the visible dent. We check the full track and frame mounting system.
Loose or cracked wall brackets let the track shift under normal operation. We reinforce or replace mounting hardware as part of the repair.
Let us know if the door is jammed off-track or just running rough, and we'll prioritize accordingly.
Technicians carry standard track sections and mounting hardware for common configurations.
A full inspection prevents a quick patch that fails again within weeks.
Track realigned or replaced, verified plumb, and tested through a full cycle before we leave.
“Backed the truck into the door and bent the track pretty badly. Replaced the section and it runs like new.”
“Track was off plumb by more than it looked. Fixed properly instead of a quick patch.”
“Appreciated that they checked the wall brackets too, not just the visible bent section.”
Usually a worn roller, a bent track section, a loose bracket, or an impact from a vehicle or debris.
We don't recommend it. Forcing a door back on the track can cause further damage or personal injury.
A section that's been bent once tends to weaken with repeated stress, so replacement is often the better call.
Pricing varies with the extent of the damage, quoted upfront before any repair begins.
It's best to leave the door as-is and call for repair rather than risk worsening the damage.
A straightforward realignment often takes under an hour; a full section replacement may take a bit longer.
Call now for a real appointment window, not a callback promise.
☎ Call +1-831-293-1591Technicians are positioned throughout Enterprise for fast response, and we cover the surrounding zip codes too.
Embedded Map Placeholder for Enterprise, AL